Jlg 10MSP Operator Manual Instrukcja Użytkownika Pobierz pdf (Strona 18)

SECTION 1 - SAFETY PRECAUTIONS

1-8 – JLG Lift – 3121227

• Keep non-operating personnel at least 6 ft. (1.8m) away

from machine during all driving operations.

• Limit travel speed according to conditions of ground sur-

face, congestion, visibility, slope, location of personnel,

and other factors causing hazards of collision or injury to

personnel.

• Be aware of stopping distances in all drive speeds.

• Do not drive at high speeds in restricted or close quarters

or when driving in reverse.

• Exercise extreme caution at all times to prevent obstacles

from striking or interfering with operating controls and per-

sons in the platform.

• Ensure that operators of other overhead and floor level

machines are aware of the aerial work platform’s pres-

ence. Disconnect power to overhead cranes.

• Warn personnel not to work, stand, or walk under a raised

platform. Position barricades on floor as necessary.

1.4 LIFTING, AND HAULING

General

• Never allow personnel in platform while lifting, or hauling.

• This machine should not be towed in the event of emer-

gency, malfunction, power failure, or loading/unloading.

Lift only with a fork lift truck using the designated fork lift

pockets in the machine’s base frame.

• Ensure platform is fully retracted and completely empty of

tools prior to lifting or hauling.

• When lifting machine with a forklift, position forks only at

designated areas of the machine. Lift with a forklift of ade-

quate capacity.

• Refer to the Machine Operation section of this manual for

lifting information.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Brak uwag

Jlg 10MSP Operator Manual Instrukcja Użytkownika Strona 18